What is the Hpe Storeonce 3660 Datasheet and How is it Used?
The Hpe Storeonce 3660 Datasheet is essentially a detailed technical specification document released by Hewlett Packard Enterprise (HPE) for their StoreOnce 3660 backup appliance. It serves as the definitive source of information for potential buyers, IT administrators, and solution architects. This document outlines everything from the physical dimensions and power requirements of the appliance to its storage capacity, data deduplication ratios, supported network interfaces, and performance metrics. It's the go-to reference for verifying compatibility with existing environments and understanding the full potential of the hardware.
The primary use of the Hpe Storeonce 3660 Datasheet is to provide clarity and enable informed planning. For instance, a data center manager might consult the datasheet to determine:
- The maximum raw and usable storage capacity available.
- The types of network connections supported (e.g., Ethernet speeds).
- The power consumption and cooling requirements for server rack placement.
- The supported backup software and protocols.
- The performance characteristics, such as backup and restore speeds.
By meticulously reviewing these details, organizations can accurately assess if the StoreOnce 3660 meets their specific backup and recovery needs, ensuring that their investment aligns with their operational goals and budget constraints. The importance of thoroughly understanding the Hpe Storeonce 3660 Datasheet cannot be overstated, as it directly influences the success of data protection strategies.
The datasheet also plays a crucial role in the implementation and ongoing management phases. When deploying the appliance, administrators will refer to it for physical installation guidelines and connectivity requirements. For performance optimization, the datasheet offers insights into potential bottlenecks and configurations that can maximize efficiency. Furthermore, when troubleshooting or planning for future scalability, the datasheet provides a baseline understanding of the system's capabilities. Consider this table of typical specifications found within such a datasheet:
| Specification | Typical Value (example) |
|---|---|
| Maximum Usable Capacity | Up to 36 TB |
| Deduplication Ratio | Up to 20:1 |
| Network Ports | 4x 1GbE, 2x 10GbE |
| Form Factor | 1U Rack Unit |
This information helps in comparing different configurations, understanding the potential for data reduction through deduplication, and ensuring the network infrastructure can support the appliance's throughput. Ultimately, the Hpe Storeonce 3660 Datasheet is an indispensable tool for maximizing the value and effectiveness of the StoreOnce 3660 solution.
To gain a deeper understanding of the HPE StoreOnce 3660 and to leverage all the technical details discussed, please refer to the official documentation available in the section below.